Uncoiler / Decoiler
1. It’s suitable for the uncoiling and recoiling of metal and nonmetallic sheet material.
2. The expansion of uncoiler is manual controlling while the maximum weight of raw material is within 2000kgs.
3. The transmission from speed reducer to main shaft is controlled by cone belt while the weight of material is within 2000kgs. This structure will be more stable, but not suitable for the weight out of 2000kgs.
4. If the thickness of material is more than 2mm, the material pressed arm is required in case of the danger in cut of the packing belt, and the loosing of material. If the weight of material is out of 2000kgs, the hydraulic expansion is suggested, and the transmission must be changed into chain instead of belt. Generally the disk braking system and frequency converter are allowed in case of the broken of speed reducer.
type
MT-200
MT-300
MT-400
MT-500
MT-600
material
width
10-200mm
10-300mm
10-400mm
10-500mm
10-600mm
material
thickness
0.1-3.0mm(material pressed arm is
suggested while the material thickness is out of 2.0mm)
material
weight
500kg
800kg
1200kg
1500kg
2000kg
I.D. of
material
460-530mm
O.D. of
material
1200mm
motor
1/2HP
1HP
1HP
2HP
2HP
speed
reducer
1:60
machine
weight
280kg
350kg
420kg
455kg
480kg

Related Products
5 axis Press robot 5 axis automatic press arm robot from 5kgs to 20kgs with automatic feeder
High speed roller feeder Achieve the Great Feed Accuracy with Roller Feeder Today, most of industry needs to use perfect roller feeder...
Twin head uncoiler decoiler Specification of twin head uncoiler 1. The uncoiler is composed by three parts: the frame, the main box...